RIM Devices are used on single swing applications, where the hardware will engage with the frame components. The RIM Crossbar is a push bar handle that when pushed down, opens the door, acting as a panic bar, and is seen many times in commercial buildings. This hardware is very durable and can handle constant use.
Commercial Split Steel Frames are designed to complement Architectural Wood doors or Hollow Metal doors. These frames consist of two separate pieces, making installation easier and allowing for flexibility in size adjustments. When assembled, they create the appearance of a double rabbeted frame, providing a polished look.
In situations where the exact size of the finished wall is uncertain, split steel frames prove invaluable. They offer the flexibility to accommodate variations in wall dimensions during finishing or unit replacement.
Commercial Split Steel Frames are constructed from cold-rolled 16-gauge Powder-Coated Galvannealed Steel, making them both durable and aesthetically appealing. The powder coating facilitates easy painting, although they come pre-finished. The frame wraps around the wall and includes an 18-gauge closure package for on-site adjustments. Closure package are available in a range of sizes to accommodate wall thicknesses from 4″ to 9-1/4″.
| Height | Top of First Hinge | Top of Second Hinge | Top of Third Hinge | Center of Bore |
|---|---|---|---|---|
| 6’8″ | 7-1/2″ | 37-7/16″ | 67-3/8″ | 39-11/16″ |
| 7’0″ | 7-1/2″ | 39-7/16″ | 71-3/8″ | 43-11/16″ |
These frames are of the Flange Type and are installed by screwing them into a sheetrock or stud through the flange. Due to their installation method and specifications, these frame systems are shipped in a knocked-down state. This means that the strike jamb, hinge jamb, head jamb, and associated closure packages are sent as individual pieces rather than as an assembled frame system. To determine the Rough Opening required for this frame, add 1″ to the nominal door width and 5/8″ to the nominal door height. To complete the frame’s appearance, a snap-on 22-gauge steel casing is also available as an option.
4-7/8” ASA Prep
ASA Plate Adapter for Non-ASA Strike
Hinge Reinforcement and Closure Package
Steel Casing Available
Certain door styles can include SDL (Simulated Divided Lite) bars applied over flat bronze GBG (Grilles-Between-the-Glass). This method of having a divided lite look achieves the most authentic divided lite look. The SDL bars will be finished to match the face of the door to complement the home.
GBG Grille Section (Flat)
SDL Colonial Grille Section
The 4700 Series is meant for low traffic areas. If you need an exit device for a high traffic area, please view information about the 4500 series.
Surface Vertical Rod (SVR) Devices are used on outswing double swing applications, where the hardware will engage with the frame components and an astragal is not desired. For a Medium Duty application Hager has the 4700 Series SVR Exit Devices. Made with superior materials and with dead locking stainless steel Pullman type latchbolts, the 4700 Series Exit Devices provide necessary security and performance at economy pricing. Properly applied and maintained, Hager 4700 Series Exit Devices and Trim are backed by a five-year warranty and meet Life Safety codes and Fire Safety requirements. This pushbar can be cut down to accommodate a 2/6 door.
The 4701 model is available in two types: a UL Listed version with a fire-rated up to 3 hours, and a standard version. Both are available 36″ wide and either 84″ or 96″ in height in both Aluminum or Dark Bronze. It is capable of being cut down to accommodate a 2/6 door. The 4701 model pairs with the 47 series trim handlesets.
The rod replacement kit is a 47-1/4″ rod, rod guide, rod connector, and the appropriate fasteners.
The extension rod kit is a 24″ extension rod, rod connector, rod guide, and the appropriate fasteners.
| Exit Device Type | Width x Height | Finish | Applied (Steel) | Applied (Wood) | Loose |
|---|---|---|---|---|---|
| SVR Exit Device | 36” x 84” | Dark Bronze | VREDBA | WVREDBA | 4701SVR3684DBRZ |
| SVR Exit Device | 36” x 84” | Aluminum | VREDAA | WVREDAA | 4701SVR3684AL |
| SVR Exit Device | 36” x 96” | Dark Bronze | VREDBA | WVREDBA | 4701SVR3696DBRZ |
| SVR Exit Device | 36” x 96” | Aluminum | VREDAA | WVREDAA | 4701SVR3696AL |
| Fire-Rated SVR Exit Device | 36” x 84” | Dark Bronze | FVREDBA | WFVREDBA | 4701SVRF3684AL |
| Fire-Rated SVR Exit Device | 36” x 84” | Aluminum | FVREDAA | WFVREDAA | 4701SVRF3684AL |
| Fire-Rated SVR Exit Device | 36” x 96” | Dark Bronze | FVREDBA | WFVREDBA | 4701SVRF3696DBRZ |
| Fire-Rated SVR Exit Device | 36” x 96” | Aluminum | FVREDAA | WFVREDAA | 4701SVRF3696AL |
| Options | Reeb Item Code | Vendor Item Code | Description |
|---|---|---|---|
| US26D Rod Replacement Kit | 4919US26D | 073587 | 4701 TOP ROD REPL PACK 47 1/4″ US26D |
| US10B Rod Replacement Kit | 4919US10B | 073574 | 4701 TOP ROD REPL PACK 47 1/4″ US10B |
| Aluminum Extension Rod Kit | 4935AL | 129379 | EXT ROD 24″ 4701 SVR ALUM |
The 4700 Series is meant for low traffic areas. If you need an exit device for a high traffic area, please view information about the 4500 series.
RIM Devices are used on outswing single swing applications. The hardware is surface mounted to the door and the panic hardware will engage with the frame components. For a Medium Duty application Hager has the 4700 Series RIM Exit Devices. Made with superior materials and with dead locking stainless steel Pullman type latchbolts, the 4700 Series Exit Devices provide necessary security and performance at economy pricing. Properly applied and maintained, Hager 4700 Series Exit Devices and Trim are backed by a five-year warranty and meet Life Safety codes and Fire Safety requirements.
The 4701 model in available in two types: a UL Listed version with a fire-rated up to 3 hours, and a standard version. Both are available 36″ wide in either Aluminum or Dark Bronze and is also available 48″ wide in Aluminum. It is capable of being cut down to accommodate a 2/6 door. The 4701 model pairs with the 47 series trim handlesets.
The 4500 Series is meant for high traffic areas. If you need an exit device for a low traffic area, please view information about the 4700 series.
Surface Vertical Rod (SVR) Devices are used on outswing double swing applications, where the hardware will engage with the frame components and an astragal is not desired. For a Heavy Duty application Hager has the 4500 Series SVR Exit Devices. Made with superior materials and with dead locking stainless steel Pullman type latchbolts, the 4500 Series Exit Devices provide necessary security and performance. Hager 4500 Series Exit Devices meet Life Safety codes and Fire Safety requirements and hold a limited lifetime warranty.
The 4501 model is available as a UL Listed version with a fire-rated up to 3 hours, and a standard version. Both are available 36″ wide and either 84″ or 96″ in height in both US10B or US26D. It is capable of being cut down to accommodate a 2/6 door. The 4501 model pairs with the 45 series trim handlesets.
In addition, the following additional parts are available:
The rod replacement kit is a 45-1/4″ rod, rod connector, and the appropriate fasteners.
The extension rod kit is a 24″ extension rod, rod connector, rod guide, and the appropriate fasteners.
The Shim Kit is used where a glass bead kit would interfere with exit device and comes with two 1/8″ shims and appropriate fasteners.
The 4500 Series is meant for high traffic areas. If you need an exit device for a low traffic area, please view information about the 4700 series.
RIM Devices are used on outswing single swing applications. The hardware is surface mounted to the door and the panic hardware will engage with the frame components. For a Heavy Duty application Hager has the 4500 Series RIM Exit Devices. Made with superior materials and with dead locking stainless steel Pullman type latchbolts, the 4500 Series Exit Devices provide necessary security and performance. Hager 4500 Series Exit Devices meet Life Safety codes and Fire Safety requirements and hold a limited lifetime warranty.
The 4501 model is available as a UL Listed version with a fire-rated up to 3 hours, and a standard version. Both are available 36″ wide in either US10B or US26D and is also available 48″ wide as a fire-rated version in US26D. It is capable of being cut down to accommodate a 2/6 door. The 4501 model pairs with the 45 series trim handlesets.
In addition, a Shim Kit can be used with 4500 Series RIM exit devices where a glass bead kit would interfere with exit device. They are two 1/8″ shims and appropriate fasteners available in either US10B or US26D.
The 3200 Deadbolts offer a reliable and versatile locking solution. These deadbolts are designed with convenience and security in mind, making them suitable for both auxiliary and primary locking purposes.
The 3215 Deadbolt features a single cylinder design, which means they require a key for locking and unlocking from the exterior, while the interior is equipped with a thumbturn for quick and easy locking and unlocking without the need for a key. These deadbolts are non-handed, meaning they can be installed on both left-handed and right-handed doors, providing flexibility in their application.
Key FeaturesSteel edge steel doors are designed with a full steel-edge perimeter creating a sturdier steel door. These doors are insulated with a polyurethane core and are available with a 90-minute fire rating when used with a 90-minute fire rated frame. Some people prefer the metal edge construction for extra strength and rigidity.
Therea are two versions of the steel edge fire doors. For commercial applications there is the Hollow Metal steel doors. For residential applications there is the RSP Series doors. All steel edge doors cannot have custom hinge and bore locations as the hinge, bore, and strike prep is completed by the factory and in accordance with fire safety codes.
RF Series Steel Edge Hinge Prep
The RSP or RF Series 90-minute fire door frames utilize a full size door (full in width and undersized in height by 3/4″ to accept a sweep). These frames are stocked by Reeb in 6/8, 7/0 and 8/0 heights and some have an option for 4” or 5-1/2” on center bore locations out of stock. When needed, these door can be trimmed by Reeb up to 3″ from the bottom only, dropping both hinge and bore locations by 3″.
The 5200 Series is meant for high traffic areas. If you need a closer for a low traffic area, please view information about the 5300 series.
A door closer is a mechanical device that closes a door in a controlled manner. It helps prevent the door from standing open, slamming closed, or pulling open in strong winds. The most common examples can usually be found in schools, convenience stores, and a multitude of other smaller businesses and public buildings.
For a heavy duty application there is the 5200 Series Door closer. It is a Grade 1 Hydraulic surface-applied door closer that is ideal for high-use environments. The packaging for this item is a tri-pack meaning it includes the hardware necessary for a Regular Arm, a Parallel Arm, or a Top Jamb Mount Installation. The installation instructions also review how to install each type in the different handing options.
5200 Series Regular Arm Mount
Click here for more information on Regular Arm, Parallel Arm, and Top Mount Closers.The 5200 closer has a slim line design and it is stocked with a slim line cover. It can be ordered as a standard closer or with a hold open option where the door is capable of being held in an open position. Many local building codes do not allow the installation of a Hold Open Door Closer in a fire rated system. Please make sure to check with your local building codes.
Door Closer Specifications
| Regular Arm Mount | Parallel Arm Mount | Top Jamb Mount | |
|---|---|---|---|
| Opening | Templating allows up to 180° | Templating allows up to 180° | Templating allows up to 180° |
| Hold-Open | Hold-open points 90° up to 180° with hold-open arm | Hold-open points 90° up to 180° with hold-open arm | Hold-open points 90° up to 180° with hold-open arm |
| Frame Face | 1-3/8” (35 mm) min. | – – | 1-7/8” (48 mm) min. |
| 1-1/8” (29 mm) minimum with drop plate, 5918 | |||
| Ceiling Clearance | 1-3/4” (45 mm) min. | – – | 2-3/4” (70 mm) min. |
| 1-5/8” (41 mm) min. for hold-open arm | 1-5/8” (41 mm) min. with plate, 5918 | ||
| Top Rail | 2-1/2” (64 mm) min. without drop plate | Standard hollow metal 5/8” frame stop | 2” (51 mm) min.. |
| 1-5/8” (38 mm) min. with drop plate, 5918 | 5-3/8” (137 mm) min. | ||
| Top Rail Clearance | 3-1/2” (89 mm) min. | 6-1/4” (159 mm) min. | 2-1/4” (57 mm) min. |
| 2-1/2” (64 mm) min. for hold-open | |||
| 3-3/8” (86 mm) min. for hold-open with plate, 5918 | |||
| 3-5/8” (92 mm) min. for hold-open with drop plate |