login status

(close)
 

5300 Series Door Closer

The 5300 Series is meant for low traffic areas. If you need a closer for a high traffic area, please view information about the 5200 series.

A door closer is a mechanical device that closes a door in a controlled manner. It helps prevent the door from standing open, slamming closed, or pulling open in strong winds. The most common examples can usually be found in schools, convenience stores, and a multitude of other smaller businesses and public buildings.

For a medium duty application Reeb stocks the 5300 Series Door closer. It is a Grade 1 Hydraulic surface-applied door closer that is ideal for standard-use environemnts. The packaging for this item is a tri-pack meaning it includes the hardware necessary for a Regular Arm, a Parallel Arm, or a Top Jamb Mount Installation. The installation instructions also review how to install each type in the different handing options.

5300 Series Regular Arm Mount

Click here for more information on Regular Arm, Parallel Arm, and Top Mount Closers.

Reeb’s stock of the 5300 Series is available in an Aluminum or Dark Bronze finish. It can be ordered as a standard closer or with a hold open option where the door is capable of being held in an open position. Many local building codes do not allow the installation of a Hold Open Door Closer in a fire rated system. Please make sure to check with your local building codes.

Click here for Installation Instructions.

Click here for a Door Sizing Chart.

Click here for 5300 Series Templates.


Door Closer Specifications

Regular Arm Mount Parallel Arm Mount Top Jamb Mount
Opening Templating allows up to 180° Templating allows up to 180° Templating allows up to 180°
Hold-Open Hold-open points 90° up to 180° with hold-open arm Hold-open points 90° up to 180° with hold-open arm Hold-open points 90° up to 180° with hold-open arm
Frame Face 1-3/8” (35 mm) min. – – 1-3/4” (45 mm) min.
Ceiling Clearance 1-5/8” (41 mm) min. – – 2-3/4” (70 mm) min.
1-5/8” (41 mm) min. for hold-open arm 1-3/4” (44 mm) min. with plate, 5918
Top Rail 2-1/2” (64 mm) min. with drop plate, 5915 Standard hollow metal 5/8” frame stop 1-7/8” (48 mm) min.
4-3/4” (121 mm) min.
4” (102 mm) min. with hold-open
3-1/8” (79 mm) min. with plate
2-1/8” (54 mm) min. with hold-open and plate
Top Rail Clearance 4-1/4” (108 mm) min. from the top of the door 5-3/4” (146 mm) min. from the top of the door 2-1/8” (54 mm) min.
2-3/4” (70 mm) min. with plate, 5917
2-1/4” (57 mm) min. for hold-open with plate, 5917
3-5/8” (92 mm) min. with plate, 5915

Updated on October 30, 2020

Was this article helpful?