The 47 Series Trim Sets match up with the Heavy Duty 4700 series panic hardware. There are many functionalities of handlesets ranging from dummys to common entry to a lever that is always locked. Choosing the right handle for the right location is imperative. All of the handles are handed as either left-hand or right-hand.
Trim
47CE
The 47CE is a Cylinder Escutcheons which uses a 3902 mortise cylinder (included). A key is needed to lock or unlock the lever. The Escutcheon is 2-5/8″ x 8″ in size.
47NL
The 47NL is a Night Latch which uses a 3901 rim cylinder (included). These handlesets are always locked and require a key to retract the latch everytime. The Escutcheon is 2-5/8″ x 8″ in size.
47DT
The 47DT is a Dummy Trim. After the lever is dogged (or turned) down, you will be able to pull the door open. The Escutcheon is 2-5/8″ x 8″ in size. R
47RN
The 47RN is a Raised Lip Pull Night Latch which uses a 3901 rim cylinder (included). These handlesets are always locked and require a key to retract the latch everytime. The Escutcheon is 3″ x 7-3/4″ in size.
Lever Styles
Withnell – Available in: CE / NL / DT
August – Available in: CE
Additional Parts
3901 Rim Cylinders are a specific keyway used on conventional cylinders. The long tail piece is included and it is machined from solid brass. The 3901 Rim Cylinder is used with the 47RN.
3902 Mortise Cylinders are a specific keyway used on conventional cylinders. They have the standard straight cam attached and an Adams Rite cam shipped loose in the box. The 3902 Mortise Cylinder is used with the 47CE and 47NL.
The following strikes are also available:
- 4910: strike for exit device
- 4913: top strike for exit device
- 4914: bottom strike for exit device
4700 Series RIM Exit Device
4700 Series SVR Exit Device
45 Series Handlesets
