The 4500 Series is meant for high traffic areas. If you need an exit device for a low traffic area, please view information about the 4700 series.
Surface Vertical Rod (SVR) Devices are used on outswing double swing applications, where the hardware will engage with the frame components and an astragal is not desired. For a Heavy Duty application Hager has the 4500 Series SVR Exit Devices. Made with superior materials and with dead locking stainless steel Pullman type latchbolts, the 4500 Series Exit Devices provide necessary security and performance. Hager 4500 Series Exit Devices meet Life Safety codes and Fire Safety requirements and hold a limited lifetime warranty.
Reeb stocks the 4501 model in two types: a UL Listed version with a fire-rated up to 3 hours, and a standard version. Both are available 36″ wide and either 84″ or 96″ in height in both US10B or US26D. It is capable of being cut down to accommodate a 2/6 door. The 4501 model pairs with the 45 series trim handlesets. You can order this exit device applied to Wood or Therma-Tru doors or loose for Hollow Metal doors.
Click Here for Information on 45 Series Handlesets
Click Here for Installation Instructions
Click Here for Door Prep Template
Click Here for Rim Cylinder Template
Click Here for Overall Dimensions
In addition, Reeb stocks the following additional parts in both US10B or US26D.
Rod Replacement Kit
The rod replacement kit is a 45-1/4″ rod, rod connector, and the appropriate fasteners.
Extension Rod Kit
The extension rod kit is a 24″ extension rod, rod connector, rod guide, and the appropriate fasteners.
The Shim Kit is used where a glass bead kit would interfere with exit device and comes with two 1/8″ shims and appropriate fasteners.