3200 Series Deadbolt

The 3200 Deadbolts are Single Cylinder Deadbolts. A single cylinder requires a key on the exterior but has a thumbturn on the interior. It is a non-handed deadbolt that works for auxiliary or primary locking purposes.

Click here Additional Information on the 3200 Series Deadbolts

Reeb stocks the 3215 model which is a cylinder with a thumbturn deadlock. It is a non-handed deadbolt that works for auxiliary or primary locking purposes. It works with a 2-3/4″ Backset and needs a 2-1/8″ bore on the face of the door. The latch hole, or the door edge bore prep, must be 1″ in diameter. Each deadbolt comes with two operating keys and use a Schlage C Keyway; it can be keyed to any Schlage key number that suits your need.

Reeb’s stock Commercial Doors and Frames only allow for a single bore. This deadbolt was brought in for special order products that may need a deadbolt latch. The available finishes in Reeb’s stock include US10B and US26D.

Click here for Additional Information on the 3215 Deadbolt

Click here for Installation Instructions of the 3215 Deadbolt

Click here for the Metal Door Template for the 3215 Deadbolt

Click here for the Wood Door Template for the 3215 Deadbolt



Updated on June 14, 2022

Was this article helpful?