Therma-Tru Complete Door System

All Therma-Tru components are engineered to work together. A complete door system includes doors, glass, and components which work together to resist leaks and drafts, and help maintain energy efficiency and weather resistance.

The sill and bottom sweep form a tight seal against wind-driven moisture infiltration at the bottom of the door system and help channel moisture away from the home. A sill pan (recommended) adds an extra layer of protection to help keep moisture away from the subfloor.

Corner seal pads complete the seal between the sill cap, bottom sweep and weatherstrip to help block potential pathways where wind-driven moisture can infiltrate the bottom corner of the door system. These are only used with inswing units.

The hinges position the door to properly compress the weatherstrip and help form a tight, even seal against air and moisture infiltration when the door closes.

The weatherstrip is specifically engineered in a variety of profiles to provide the best possible fit with Therma-Tru door systems, helping to deliver a precise seal between the door and frame.

A multi-point locking system engages the door and frame at three points from top to bottom, helping to preserve the weatherstrip’s seal even under wind pressure. A multi-point locking system is highly recommended for security and protection.

A lip-lite frame (shown right) features a compression seal against weather on the outside of the door and an adhesive seal against weather on the outside of the glass. Flush-glazed glass (shown left) is built directly into the door without a Lip-lite frame, featuring a high-performance adhesive weather seal inside and out.

EzyJamb

Note: EzyJamb is no longer offered. This article will remain available as a reference.

EzyJamb is a trimless door frame which wraps the drywall during framing and, when mudded and painted, blends seamlessly with the wall. This frame system is installed prior to the wall being finished so the frame becomes part of the wall, eliminating any door unit and wall separation. The EzyJamb system does not need casing applied to complete the unit allowing for a stream lined, contemporary look.

Unfinished Wall with Screw Flange

Finished Wall (Mudded and Painted)

EzyJamb is a 20 gauge pressed metal frame made from A-60 Galvanealled Steel. Due to The unique construction of the frame uses the frame to support the hinges and the hinges to support the door. Due to this, if desired, a floor to ceiling door is possible by omitting the head jamb.

All EzyJamb frames need to be field installed. Hinge options are available in an Architectural Square Corner or a Roc-York Invisible Hinge option.

Bravo MDF Doors

Bravo MDF doors are built exactly like wood doors were made centuries ago with the traditional doweled stile and rail construction. Separate stile, rails, and panels are assembled by hand utilizing twenty-first century technology. They are constructed with wood stiles for screw holding strength and from highly refined MDF which is a stable and abundant wood fiber material. They are available with a solid raised or flat panel design. The wood dowels ensure against stile and rail separation.

Features

51 traditional stile and rail designs
Crisp detailed miters and profiles
Doweled and bonded construction
Architecturally correct panel configuration
Custom design capability
Made from stable MDF
Warp and bow resistant
Factory primed on all six sides, ready to start the finishing process
Made in the USA by proud American craftsmen
Available with a 20 minute fire rating
Limited Lifetime interior warranty

Bravo Door Profiles

Bravo Doors feature different sticking and panel profiles.

No Sticking Profile Specifications

Ogee Sticking Profile Specifications

Ovolo Sticking Profile Specifications

Square Sticking Profile Specifications

Bravo Door Layouts

Bravo doors are part of the 4000 series available from DoorMerica.

Hollow Metal Masonry Frame

A Hollow Metal masonry frame is designed to meet the specific requirements of masonry wall, which can include tile, stone, brick, or concrete. In this type of frame installation, the masonry wall is longer than the frame depth. To ensure a proper fit, the frame should be installed flush against one side of the wall – or butted up against the wall. The installation process for this application involves the use of anchors and dynabolts. The rough opening needed is the nominal door width + 4-1/2” and nominal door height + 2-1/4”. For example, a 3’0” (36″) x 6’8” (80″) door would need a rough opening of 3’4-1/2” (40-1/2″) x 6’10-1/4″ (82-1/4″).

Frame Features

Constructed from sturdy 16-Gauge Galvannealed steel.
Comes primed and ready for painting to match your desired aesthetic.
Stocked in 5-3/4″ sizes and shipped in a knocked-down state, bundled together with hardware, doors, and other necessary accessories.
Designed for use in existing wall construction where the door opening becomes visible after the walls are set. These frames are secured in place using anchor bolts.
Reinforced to accommodate a door closer for added functionality.
Hinge preparations allow for the use of standard or heavy-duty commercial hinges, offering flexibility in door hardware selection.
Fire-rated for up to 90 minutes, providing enhanced safety.
Equipped with punched and dimpled frame preparations that include anchors and bolts. This includes EWA prep, welded pipe anchor, punch and dimple, and loose expansion bolts.
Features an Equal Rabbeted Jamb and is designed for use with 1-3/4″ doors.

Click here for Installation Instructions.

Hollow Metal Doors

Hollow Metal Doors are crafted from strong 18-gauge galvannealed steel and feature a polystyrene core. These doors are capable of achieving a fire rating of up to 90 minutes. These doors come from the factory pre-machined to fit SteelCraft hinges and strike locations. They can be prepped in two ways: with a single bore having a 2-3/4″ backset to SteelCraft specifications or as a RIM reinforced option.

Key Features

Made from sturdy 18-gauge Galvannealed Steel
Slightly undersized by 1/4″ in width and 5/8″ in height (Square Edges)
Highly durable and easy to paint
Equipped with a polystyrene insulated core, enhancing insulation performance and impact resistance
Reinforced to accommodate door closers
Fire rated for up to 90 minutes
161 Prep option with a 2-1/8″ x 2-3/4″ backset
RIM Reinforced option for Panic Hardware compatibility
4-1/2″ Square Corner Hinge prep

Door Layout Options

6 Panel Angled View

2 Panel Angled View

Smooth-Star® Shaker Style Doors

Therma-Tru’s Smooth-Star® Shaker style doors and sidelites combine simple designs with broad appeal. Featuring clean, simple lines with square recessed panels, these new designs bridge the gap between yesterday’s styles and today’s trends.

Smooth-Star® Shaker Style Door

Shaker style doors and sidelites come standard with flush-glazed glass. Built directly into the door during the manufacturing process, flush-glazed glass eliminates the need for a lite frame allowing more natural light into the home. The glass is surrounded by the door’s polyurethane foam core providing durability, while a dual adhesive high-performance weather seal eliminates pathways for air and water infiltration.

Glass built directly into the door.
Clean lines for a seamless appearance.

High performance seal to prevent air and water infiltration.

Privacy and textured glass adds a simplistic yet decorative element to the entryway. Low-E glass enhances the Shaker styling of the door while adding the benefit of energy efficiency.

Chinchilla

Chord

Granite

Rainglass

Satin Etched

The flat profile Simulated Divided Lites (SDL) complement the square recessed panels on the doors and sidelites. SDL bars are used to create 2, 3, 4, or 6 lite configurations for doors, or 2 lite configurations for sidelites to coordinate with existing window grid patterns on the home. Available in both 6'8" and 8'0" heights, Shaker style doors pair well with either a craftsman lite Shaker style flush-glazed sidelite or a full lite flush-glazed sidelite both available in 6'8" and 8'0" heights.

An optional 4 block dentil shelf can be added to Shaker style doors in order to complement architectural elements around the house. The craftsman lite 2 panel Shaker flush-glazed door is ideal for front, side, and back entry doors, while 2 panel craftsman Shaker doors deliver the Shaker aesthetic without glass and is ideal for utility door applications.

Dentil Shelf on Therma-Tru Smooth-Star Door

Smooth-Star Shaker style doors are backed by Therma-Tru’s lifetime limited warranty and their exclusive flush-glazed fiberglass door replacement rider which provides protection in case of accidental glass breakage during construction or installation. Providing a seamless appearance by no longer needing a lite frame, Smooth-Star Shaker style doors and sidelites offer a clean, simple aesthetic with long-lasting performance.