4500 Series SVR Exit Device

The 4500 Series is meant for high traffic areas. If you need an exit device for a low traffic area, please view information about the 4700 series.

Surface Vertical Rod (SVR) Devices are used on outswing double swing applications, where the hardware will engage with the frame components and an astragal is not desired. For a Heavy Duty application Hager has the 4500 Series SVR Exit Devices. Made with superior materials and with dead locking stainless steel Pullman type latchbolts, the 4500 Series Exit Devices provide necessary security and performance. Hager 4500 Series Exit Devices meet Life Safety codes and Fire Safety requirements and hold a limited lifetime warranty.

The 4501 model is available as a UL Listed version with a fire-rated up to 3 hours, and a standard version. Both are available 36″ wide and either 84″ or 96″ in height in both US10B or US26D. It is capable of being cut down to accommodate a 2/6 door. The 4501 model pairs with the 45 series trim handlesets.

Additional Parts

In addition, the following additional parts are available:

Rod Replacement Kit

The rod replacement kit is a 45-1/4″ rod, rod connector, and the appropriate fasteners.

Extension Rod Kit

The extension rod kit is a 24″ extension rod, rod connector, rod guide, and the appropriate fasteners.

Shim Kit

The Shim Kit is used where a glass bead kit would interfere with exit device and comes with two 1/8″ shims and appropriate fasteners.

Related Articles
45 Series Handlesets
4500 Series RIM Exit Device

Updated on February 13, 2024

Was this article helpful?