Tools Needed:
- Exterior handleset
- Foam gaskets
- Interior handleset
- Plastic screw set
- Handle
- Screws
- Cap
- Plastic bushing
- Keys
- 6mm Allen wrench
- Screwdriver
- Needle nose pliers
Step 1: Slide the foam gaskets into the handleset.
Step 2: Place the exterior handleset (1) into the door and tighten the plastic set screw (4) into the handleset with the 6mm Allen wrench (10).
One note about step 3: Take a set of needlenose pliers, grab the spindle, and turn it to the position you need. For a right hand door, the spindle should be turned to the left. For a left hand door, the spindle should be turned to the right.
Step 3: Take the plastic bushing (8) and line it up with the spindle.
Step 4: Take the interior handleset plate (3) and line up the grooves with the plastic bushing. Then, use a screwdriver (11), to tighten the plate with the screws (6).
Step 5: Place the gray plastic bushing (8) onto the handle (5), then proceed to push it into place. Remember to test the mechanisms and keys!
Step 6: Screw the decorative cap (7) into place.