login status

(close)
 

Tru-Lock Multi-Point System

Tru-Lock Multi-point System offers 2 points of contact approximately 18” apart, and requires the least amount of prep. Doors using Tru-Lock are not affected by cut downs but can only be used on 1-3/4” doors. It is used with wood doors that are 6/8, 7/0, or 8/0 in height.

The multi-point operates in place of a deadbolt. The key and thumb turn operates the flip bolts that lock into slotted strike in the jamb. There is an option to use Schlage and Baldwin handlesets. The Tru-lock system can be used with any standard door lock because it works off the deadbolt mechanism of your door.



Updated on May 15, 2021

Was this article helpful?