Even the best doors can fall victim to wear and tear. Scratches and chips happen, but there’s a simple solution to keep your door looking its best – the touch-up pen.
Before applying any touch-up paint, ensure the area is clean and free from dust, dirt, or grease. Use a mild soap and water solution, then allow the area to dry completely.Before using the pen, shake it well to ensure the paint inside is mixed, and press the tip against the cap, so it slightly bleeds out.
Gently apply the touch-up paint to the damaged area using minimal pressure to match the surrounding area. It’s better to apply several light coats than one thick coat, as this will help achieve a more seamless repair. Allow to dry completely to see if it needs any additional coats.
After the final coat has dried, repeat the same process with the top coat pen.
After use, ensure the pen caps are securely fastened to prevent the paint from drying out. Touch-up pens are a convenient solution for minor cosmetic repairs, helping to extend the life and appearance of your Therma-Tru door units.
