login status

(close)
 

Public Access Sill with Thermal Break

A Therma-Tru Public Access Sill is an aluminum construction to resist corrosion. The sill is only 1/2″ high with a 1:2 ramp slope to meet Americans with Disabilities Act (ADA) requirements. The sill also features a thermal break which helps to maintain the temperature of the interior side of the sill. Public access sills are able to be used for either an inswing or outswing application. It is recommended that all outswing units use NRP hinges. The standard Rough Opening height for a 6/8 inswing unit is 81-1/2″.


Public Access Sill – 6-1/16″ used for 4-9/16″ Jambs


Unit Capabilities

Layouts

An Therma-Tru Public Access sill can be used with single doors and double doors.


Depths

This sill is available for 4-9/16” and 6-9/16” jamb depths.


Finish and Cap Color

This sill is available in a Mill or Bronze finish.


Horns

Sill horns cannot be created with this sill.


Replacement Parts

There are no replacement parts for this sill.


Updated on May 1, 2020

Was this article helpful?