Endura Public Access Inswing Sills

An Endura Public Access Inswing Sill is an aluminum composition. The sill in total is only 1/2″ high with a 1:2 ramp slope to meet Americans with Disabilities Act (ADA) requirements. The edges and threshold of the sill are only 1/4″ creating a small dam, to help prevent water from entering the dwelling. The sill also features a thermal break which helps to maintain the temperature of the interior side of the sill. The standard Rough Opening height for a 6/8 inswing unit is 81-1/2″.

Unit Capabilities


The Endura Public Access Inswing Sill can be used with single doors, double doors, doors with one sidelite, doors with two sidelite and 2 door patios. Door with Sidelites Units with Public Access Sill are not compatible with Storm Doors. Bottom of Storm Door may not meet the taper on the Sill.


This sill is available for 4-9/16” and 6-9/16” jamb depths.


This sill is available in a Mill or Bronze finish.


Sill horns cannot be created with this sill.

Replacement Parts

There are no replacement parts for this sill.

Updated on May 15, 2021

Was this article helpful?