An Endura Public Access Tile Back Inswing Sill is an aluminum composition. The sill in total is only 1/2″ high with a 1:2 ramp slope to meet Americans with Disabilities Act (ADA) requirements. The edges and threshold of the sill are only 1/4″ creating a small dam, to help prevent water from entering the dwelling. The sill also features a thermal break which helps to maintain the temperature of the interior side of the sill. The standard Rough Opening height for a 6/8 inswing unit is 81-1/2″.
![](https://learn.reeb.com/wp-content/uploads/2020/04/kb-exterior-enduratilebacksill.jpg)
![](https://learn.reeb.com/wp-content/uploads/2019/03/kba-EnduraPublicAccessSills-1.jpg)
Typical ADA Sill
![](https://learn.reeb.com/wp-content/uploads/2019/03/kba-EnduraPublicAccessSills-2.jpg)
Endura Standard ADA Inswing Sill shown for detail
Tile back sills allow for the tile to butt up against the sill for a clean look.
![](https://learn.reeb.com/wp-content/uploads/2019/03/kba-EnduraPublicAccessSills-11.jpg)
![](https://learn.reeb.com/wp-content/uploads/2019/03/kba-EnduraPublicAccessSills-12.jpg)
Unit Capabilities
Layouts
The Endura Public Access sill can be used with inswing single doors and double doors.
Depths
This sill is available for 4-9/16” and 6-9/16” jamb depths.
Finish
This sill is available in a Mill or Bronze finish.
Horns
Sill horns cannot be created with this sill.
Replacement Parts
There are no replacement parts for this sill.