On-Guard White Shield jambs, or frames, are a composite material with a matte finish and pleasant sheen. While it is pre-finished, if desired you can also finish it onsite with a good exterior paint. The frame itself is rot proof and works great with a Therma-Tru door unit.
Reeb Finish
This jamb species cannot be finished by Reeb Finish.
Layouts
On-Guard White Shield jambs can be used with single doors, double doors, doors with one sidelite and doors with two sidelites. Units with Mullposts can have FrameSaver Primed Mullposts.
Depths
The On-Guard White Shield jamb is available in 4-9/16″, 5-1/4″, 6-9/16″, and 7-9/16” jamb depths. This jamb cannot be customized to other jamb depths. Transom sills are also available in standard 4-9/16” and 6-9/16” sizes, with reinforced transom depth options of 4-9/16″, 6-9/16″, or 7-9/16″.
Lengths
All standard heights are available for this type of frame, along with some material available in 10’ pieces to accommodate larger width or taller units. The 10’ pieces are newer inventory and may not be ordered at this time.
Exterior Casing
Brickmould is available as an exterior trim in a matching material and will be 2” in width.