7/4 Wood Outswing Sill

The 7/4 Wood Outswing Sill is an all-wood sill which can be a solid piece of wood or multiple pieces of wood glued lengthwise together. It can only be used for outswing units and gives a 6/8 unit a rough opening height of 82-1/2″. It is recommended that all outswing units use NRP hinges.



Unit Capabilities

Layouts

A 7/4 wood outswing sill can be used with single doors, double doors, doors with one sidelite, and doors with two sidelites.


Depths

This sill is available as solid construction for 4-9/16” and 5-1/4” jamb depths. It is also available as multiple pieces glued together for 6-9/16” and 8-1/8” jamb depths.


Finish

This sill is available in Oak or Mahogany.


Horns

Sill horns can be created by up to 4″.


Replacement Parts

There are no replacement parts for this sill.



Updated on May 15, 2021

Was this article helpful?