Standard Surface Mount Barn Door Hardware Set

The Standard Series Barn Door Hardware Surface Mount Set can be used for 1-3/8” or 1-3/4” thicknesses. The stock kits should be used with 1-3/8” wood doors or solid core/wood core molded doors with a double top rail (preferably). The double top rail in a molded door will allow the hardware to be fastened securely. The track needed is a separate item.


Hardware

  • Straight Strap Hangers (2)
  • Track Stops (2)
  • T-Guide (1)
  • T-Guide Screws (2)
  • Carriage Bolts (4)
  • Hex Lag Bolts (6)
  • Washers (6)
  • Cap Nuts (4)
  • Anti-Jump Blocks (2)
  • Anti-Jump Block Screws (4)
  • Spacers (6)
  • Hex Key Wrench (1)
  • Lock Washers (6)

Updated on October 15, 2024

Was this article helpful?