Barn door hardware typically requires a track that is twice the size of the door opening so the doorway can be fully exposed. In some situations, there isn’t enough room for a conventional barn door. The Barnfold folding barn door hardware series tackles this problem by combining the J-strap hangers with the space saving convenience of bifold doors.
Barnfold mounted doors attach to the outside of the opening unlike bifolds that attach inside the opening. It only needs 5″ of adjacent wall space for a clear opening. The doors can be installed to open either to the left or to the right and all the of the doorway is accessible. This design does not need a floor guide for use. The hardware can hold 125 pounds for a 2-door setup or 250 pounds for a 4-door setup
Hardware
Reeb stocks a 2-door hardware set for 2/6, 3/0, and 4/0 openings as well as a 4-door hardware set for 5/0 and 6/0 openings. The hardware sets include one track. The 2-door set includes the items listed below while the 4-door set includes two sets of the items below.
- Left and right swiveling J strap (2)
- One fixed hanger stop and one adjustable hanger stop
- Bottom pivot kit
- Anti-jump block
- Four 2-1/2ʺ × 1-1/2ʺ hinges
- 4ʺ pull handle
- One set of hinge installation templates
- All necessary bolts, nuts, screws, etc. for a two-door installation
2-Door Hardware Set
4-Door Hardware Set
Click here to view the installation instructions.
