The Stainless Steel Barn Door Hardware Top Mount Set can be used for 1-3/8”, 1-3/4”. This hardware can only hang doors weighing less than 100 pounds. It can be used with a wood doors or hollow core molded doors with a double top rail (preferably). The track needed is a separate item.
Click here to view the installation instructions.
Hardware
- Top Mount Hangers (2)
- Anti-Jump Blocks (2)
- Track Stops (2)
- Hex Lag Bolts (6)
- Anti-Jump Block Screws (4)
- T-Guide (1)
- Washers (6)
- Spacers (6)
- T-Guide Screws (2)
- Cap Nuts (4)
- Hex Key Wrench (1)
Recommended ceiling clearance for this hardware is 5”
