login status

(close)
 

Solid Pine Jamb

Solid Pine is the most cost effective jamb, or frame, you can buy that’s made from solid wood. It is very common because of this and can be finished at home easily.


Reeb Finish

This jamb species cannot be finished by Reeb Finish.


Layouts

Solid Pine jambs can be used with single doors, double doors, doors with one sidelite and doors with two sidelites. Standard 4-9/16” or 6-9/16” jamb sizes can also be used for a 2-door and 3-door patio unit.


Depths

This jamb is stocked in 4-9/16”, 6-9/16”, and 8-1/8” as one solid piece. Anything larger than 8-1/8” will be a built up jamb that uses extension jambs or another jamb piece that’s ripped back and glued back onto the original jamb set. Extension jamb material is available for this species. This jamb can be built up to accommodate 13-3/8” frame depths. Transom sills are available in 4-9/16” and 6-9/16”.


Lengths

All standard heights are available for this type of frame, along with some material available in 10’ pieces to accommodate larger width or taller units.


Exterior Casing

Brickmould and flat casing are available as an exterior trim in a matching pine material. The Brickmould will be 2” in width. The flat casing is 1×4 (actual measurement of 3/4” x 3-1/2”) and 1×6 (actual measurement of 3/4” x 5-1/2”).


Updated on May 11, 2020

Was this article helpful?