PermaCast Round No-Taper Columns

PermaCast® columns are the most used columns in the United States. Made from a proprietary blend of fiber-reinforced polymers, PermaCast columns provide an aesthetically pleasing column with exceptional structural capabilities. This durable and low maintenance column provides a seamless look to the front porch that stands up to the elements like no other product on the market. PermaCast® columns are rot-proof weatherproof, insect proof, and come with a Limited Lifetime Warranty.

Round No-Taper columns offer the same inside and outside diameter throughout the height of the column. Round No-Taper Permacast Columns are made from marble dust and fiberglass allowing them to be loadbearing and an excellent structural support. These columns can be ordered with a plain look or a flute that would extend the length of the column.

Caps and Base Sets

The standard cap and base for a PermaCast column are made of polyurethane. They fit over the shaft and do not alter the height of the column. The Tuscan Cap and Base are the Standard for this column but are sold as separate items. PermaCast No-Taper cap and base sets do not come with a flashing or installation kit.

The Decorative Cap and Base sets do not fit well with a no-tapered column. If this look is wanted, order the next size up for the cap but the correct size for the base (ie: 8” column, order 10” cap with an 8” base). It will need to be modified in the field to fit properly. HB&G nor Reeb will modify the Cap to fit a no-tapered column.


Neckmoulding

Neckmoulding is a trim piece that can be put at the top of the column for a more decorative approach. For Round No-Taper columns, they are not shipped with the column and are a loose accessory. This part is a special order piece and will be available with the standard HB&G special order lead time.


Column Sizes & Types

PermaCast No-Tapered Column options are available in the sizes below, Reeb does not stock all these options. The dimensions in column A are the diameter of the column at the bottom. The dimensions in column B are the diameter of the column at the top. The dimensions in column C are the width of the base. The dimensions in column L are the width of the cap.

Column Size A B C L Lengths Avail.
8” 7-5/8” 7-5/8” 10-1/2” 10-5/8” 6’, 8’, 9’, 10’
10” 9-5/8” 9-5/8” 13-1/8” 12-13/16” 6’, 8’, 9’, 10’, 12’
12” 11-5/8” 11-5/8” 16-1/2” 15-7/8” 6’, 8’, 9’, 10’, 12’
14” 13-5/8” 13-5/8” 19-1/2” 19-1/8” 6’, 8’, 9’, 10’, 12’, 14’
16” 15-3/4” 15-3/4” 22-1/8” 22” 6’, 8’, 9’, 10’, 12’, 14’, 16’, 18’, 20’
18” 17-1/2” 17-1/2” 24-5/8” 24-5/8” 6’, 8’, 9’, 10’, 12’, 14’, 16’, 18’, 20’
24” 24” 24” 33-1/2” 33-3/8” 8’, 10’, 12’, 14’, 16’, 18’, 24’

Split Options

PermaCast columns can be split numerous ways to fit the needs of the home. It is important to note that once the column is split, there is no load bearing capacity for the column. There are two options for split kits: a non-flange split kit or a flanged split kit. Reeb has access do to the “D” cut on the columns. All other cuts need to be factory ordered from HB&G.

For more information about split kits, click here.


Special Order (Custom)

Custom fluting is available for round no-taper PermaCast columns. The custom flute is milled after the column is manufactured and can be modified to your specific length. All round PermaCast® columns, 6″x 4′ – 30″x 30′, are available with an optional custom flute. Adjusted Flutes are also available.



Updated on July 14, 2021

Was this article helpful?