login status

(close)
 

Commercial Miscellaneous Accessories

Commercial doors may also use some additional accessories including filler plates for the doors or jambs, push or pull plates, and stops or silencers.


Filler Plates

Commercial doors and jambs may come pre-prepped for hinges and strikes. The following are primed steel filler plates that can be attached if those prepped areas are not necessary.

336L Hinge Filler Plate
Allows existing doors and frames to be used for a non-latching push/pull application

336P Deadbolt Filler Plate
Allows existing doors and frames to be used for a non-latching push/pull application

336Q Jamb Filler Plate
Allows existing doors and frames to be used for a non-latching push/pull application


Plates

The pull, push, and kickplates attach to the face of the door. They are all a US32D finish.

Pull Plate 4″ x 16″

Push Plate 4″ x 16″

Kickplate 8″ x 34″


Stops and Silencers

Stops are either attached to the door or the floor to help stop the door from opening too far. The choice between a wall or a floor stop come down to the material of the floor and preference. If the floor is made of concrete, then a wall stop may be preferred for easier installation. Silencers help to limit the sound given off when the door closes.

Wall Stop
Used with a door lock that has no button for the lock

Wall Stop with Button
Used with a door lock that has a button for the lock

Door Silencer (Shipped with Hollow Metal Units)


Updated on September 29, 2020

Was this article helpful?