Using barn door bi-pass hardware is a unique way to create a multi-dimensional sliding barn door system. While typical barn door hardware uses one track with standard hardware, a bi-pass application needs two set of hardware: a standard hardware set and track as well as a bi-pass hardware set and track. Additional mounting hardware is necessary as well as a built out soffit or a non-soffit spacer kit.
The hardware options can accomodate 1-3/8″ or 1-3/4″ door thicknesses. Both sets of hardware are capable of holding a door that weighs up to 400 pounds. Recommended Ceiling Clearance on this hardware is 12”
Click here for bi-pass installation instructions
Click here for bi-pass spacer kit install instructions
Click here for a video on how the bi-pass hardware operates
Hardware
The hardware set includes the following parts and pieces.
- Straight Strap Bypass Hangers (2)
- Track Stops (2)
- J-Guide (1)
- J-Guide Screws (2)
- Grab/Push Stops (3)
- Carriage Bolts (4)
- Lock Washers (4)
- Washers (6)
- Washers (6)
- Hex Lag Bolts (6)
- Felt Pad (1)
- Hex Nuts (4)
- Spacers (6)