The Stainless Steel Barn Door Hardware Surface Mount Set can be used for 1-3/8” or 1-3/4” thicknesses. The stock kits should be used with 1-3/8” wood doors or solid core/wood core molded doors with a double top rail (preferably). The double top rail in a molded door will allow the hardware to be fastened securely. Note: This item is ONLY the hardware. The track needed is a separate item.
Click here to view the installation instructions.
Hardware
- Straight Strap Hangers (2)
- Carriage Bolts (4)
- Anti-Jump Blocks (2)
- Track Stops (2)
- Hex Lag Bolts (6)
- Anti-Jump Block Screws (4)
- T-Guide (1)
- Washers (6)
- Spacers (6)
- T-Guide Screws (2)
- Cap Nuts (4)
- Hex Key Wrench (1)
Recommended Ceiling Clearance on this hardware is 5”