Basic Fixed Inswing Sill

Note: The Basic Fixed Inswing Sill is no longer offered. This information will remain available as a reference.

The Basic Fixed Inswing Sill has a slanted cap and nosing which mates with the single-bulb bottom sweep to help form a tight seal. For a standard 6/8 unit, the rough opening height is 82-1/2″. There is no sill extender possible for this sill.

Unit Capabilities

Layouts

A basic fixed sill can be used with single doors and double doors.

Depths

This sill is available for 4-9/16” and 6-9/16” jamb depths.

Finish and Cap Color

This sill is available in a Mill or Bronze finish with a dark cap.

Horns

Sill horns cannot be created with this sill.

Replacement Parts

There are no replacement parts for this sill.

Reeb Finish Jamb Components

A pre-finished door adds a level of beauty to a home but also the confidence regarding its durability. Adding a pre-finished frame to a completely finished door system means there is less work during installation, but there is continued assurance about the unit. Reeb Finish can only finish certain frames and these are portray below, along with their corresponding warranties.

On-Guard Woodgrain

Finish Options	Warranty
Stain/Paint	10 Years

On-Guard Straight Grain

Finish Options	Warranty
Stain/Paint	10 Years

On-Guard Primed

Finish Options	Warranty
Stain/Paint	10 Years

Solid Wood

Finish Options	Warranty
Stain/Paint	1 Year

Reeb Finish Interior Casing

Reeb Finish offers a Primed Non-finger jointed Poplar casing. It can be painted or finished with Smooth Grain to match the interior finish of the frame. The casing is always shipped loose and is available in two different profiles, WM351 and WM445H.

WM351 Casing – 2-1/2″ wide

WM445H Casing – 3-1/2″ wide

Reeb Finish PrismaGuard®

Handcrafted and professionally applied in a controlled environment, a PrismaGuard premium finish is built to last, giving you confidence and peace of mind. The premium finish undergoes rigorous testing with specialized equipment to help ensure it delivers a consistent high-end appearance with a low-maintenance coating that preserves the door’s color for years to come.

A PrismaGuard finish is designed for optimal performance with Therma-Tru fiberglass doors. Doors finished with PrismaGuard will receive a dual top coat. A preliminary top coat seals the finish and enhances the color applied during the painting process, adding durability and sheen to the final product. A second top coat provides maximum durability and protection from the elements.

The door isn’t the only thing that can be finished! Reeb Finish Stain and Reeb Finish Paint can be applied to On-Guard composite or Solid Wood frames, exterior brickmould, or interior casing. Having a completely pre-finished unit makes install easier, but Reeb Finish also offers the option of a split finish. The outside of the unit can match the exterior while the interior can match your home’s design.

All finishes on fiberglass doors and On‑Guard™ composite frames feature a 10‑year limited warranty, while a finish on a solid wood frames is a one‑year warranty. Reeb Finish Stain is available in the 12 finishes while Reeb Finish Paint is available in 22 colors.

Click here to access the Reeb Finish Catalog and view our color offering.

Ultimate Trilennium Astragal

Built to complement the strength and security of the Trilennium Multi-Point Locking System, the Endura Trilennium Compatible Astragal offers superior French door performance. The standard Flip lever secures your French door unit with two lasting seals without reaching or bending, protecting against air and water infiltration. Smarter French door performance and protection paired with the strongest lock on the market offers ultimate peace of mind.

Features

Complements the unmatched strength and security of the Trilennium Multi-Point Locking System.
Patented spring-loaded Floating Boot and Flush Bolt operate independently, automatically sealing against the lowest point on the sill cap, even if the bolt hole isn’t drilled deep enough.
Astragal boot lifts clear of the sill when operating the inactive door panel, preventing rubbing, wear and damage common in other astragal products.
The Flip Lever Astragal’s built-in Flip Lever locks and unlocks the astragal in one easy motion for Enhanced Accessibility and ultimate satisfaction.
The Simple Solution Corner Pad works with the weather strip and enhances sealing power, even with wide margins.
Trilennium offers a full portfolio of attractive hardware options to suit any style.
Trimmable up to 7″ to fit any size entryway.

The Ultimate Trilennium Astragal is available in bronze aluminum or wrapped in fir, oak, mahogany, or pine.

Ultimate Multi-point Astragal

Protect your home and eliminate traditional double-door performance challenges with the one of a kind Multi-Point Astragal. MPA delivers the sealing power of a multi-point lock without the multi-point price tag – multi-point functionality is built right into the astragal and even works with standard deadbolt packages for ultimate cost-efficiency. Plus, MPA automatically forms a custom seal against the sill cap, even if conditions aren’t perfect, saving time and eliminating costly service calls. Beyond delivering improved performance, MPA is easy to use, providing Enhanced Accessibility for a product homeowners will love.

Engaging the deadbolt activates built-in locking mechanism.

Built-in lock pawls engage with keepers in the active door.

Flip lever locks and unlocks the astragal in one easy motion.

Flush bolt and floating boot lift clear of the sill for damage-free operation.

Features

In addition to the deadbolt, MPA features two additional locking points that are built right into the astragal and automatically engage when the door is locked to fight deflection. No need to buy an upgrade locking system in addition to the astragal – everything is included.
Patented spring-loaded Floating Boot and Flush Bolt operate independently, automatically sealing against the lowest point on the sill cap, even if the bolt hole isn’t drilled deep enough.
Astragal boot lifts clear of the sill when operating the inactive door panel, preventing rubbing, wear and damage common in other astragal products.
MPA features a built-in Flip Lever that locks and unlocks the astragal in one easy motion for Enhanced Accessibility and ultimate satisfaction.
Works With Standard Hardware. MPA works with most standard deadbolt packages for even more savings.
Pre-applied to every astragal, the Simple Solution Corner Pad works with the weatherstrip and enhances sealing power, even with wide margins.
Trimmable up to 7″ to fit any size entryway.

The Ultimate Multi-Point Astragal is available in bronze aluminum.

Fypon Pediments

Pediments are a decorative trim that can be added above the door entry way or above a window. With styles like sunburst and peaked, houses will have a more refined look.

Segment Sunburst: SWDH_____

Half-Round Sunburst: SWDH_____

Combination Acorn Pediment: CAP_____

Combination Peaked Cap Pediment: CPCP_____

Combination Sunburst Pediment: CSP_____

Pediments can be combined with pilasters or flat trim to create a complete door or window surround.

Backed by a lifetime limited warranty, Fypon products won’t warp, crack, rot or split, saving future replacement and maintenance. There is no stain or paint prep saving time and labor during installation. It is recommended to use Loctite PL Premium Adhesive (Part Number ADH1) as a bonding agent to the exterior or interior surface, followed by screwing or nailing to securely fasten for polyurethane products

For more information about Fypon’s products, please reference our in-stock catalog.

For additional information on adhesives, detailed installation instructions and finishing information, please reference Fypon’s website

Fypon Board and Batten Shutters

Fypon’s Board and Batten shutters have a rough-sawn cedar look without the maintenance of wood. Made from durable polyurethane, the shutters are insect- and moisture-resistant and won’t warp, rot, crack, or split. They can be painted any color to complement a home’s architectural design. Shutters are sold in pairs.

The part number for the Board and Batten shutters is SH3PCWWXHHRS where:

SH = shutter
3PC = 3 Board and 2 Batten
WW = Width
HH = Height
RS = Rough Sawn

For more information about Fypon’s products, please reference our in-stock catalog.

For additional information on adhesives, detailed installation instructions and finishing information, please reference Fypon’s website

Height Measurements

Height Factor

When determining the height of an exterior door unit, there are a number of things to consider.

Height of the Door: A standard door is 6’8″ (80″) but not all door units are this height. The height of the door may or may not include the sweep in their measurement.
Type of Sill: Each sill has a slightly different height which factors in the calculation of the Unit Dimension Height.
Inclusion of a Transom in the Configuration: A unit with a transom will have an adder for the unit dimension of the transom. Most transoms have a 13-1/2” Unit Dimension.
Swing of the Unit: The swing of the unit has a huge impact on the Unit Dimension height because of the way the door sits on the sill. For an inswing unit, the door sits on the sill cap while for an outswing unit it sits on the metal saddle.

Measurement Types

There are four different types of Height measurements.

Unit Dimension Height: Measurement of a unit from the top of the head jamb to the bottom of the sill
Rough Opening Height: Measurement from the head stud to the subfloor
Brickmould Dimension Height: Measurement of a unit from the top of the head brickmould to the bottom of the sill
Masonry Opening Height: Measurement from the head masonry piece to the subfloor

Height Measurements

An exterior unit includes a head jamb, the door, and the sill. The measurements below are based on a 3/4″ head jamb (in the rabbet) and a 79-1/4″ door height before the sweep is added.

Inswing

Sill Type	Sill Height	Sweep/Clearance	UD	RO	BD	MO
Adjustable Composite	1-1/2”	1/2”	82”	82-1/2”	83-1/4”	83-1/2”
Patio	1-1/2”	1/2”	82”	82-1/2”	83-1/4”	83-1/2”
7/4 Wood	1-1/2”	1/2”	82”	82-1/2”	83-1/4”	83-1/2”
7/4 High Dam Wood	1-1/2”	1/2”	82”	82-1/2”	83-1/4”	83-1/2”
Public Access	1/2”	1/2”	81”	81-1/2”	82-1/4”	82-1/2”

Outswing

Sill Type	Sill Height	Sweep/Clearance	UD	RO	BD	MO
Composite	1-1/16”	1/8”	81-3/16”	81-11/16”	82-11/16”	82-15/16”
Bumper	1/2”	1/8”	80-5/8”	81-1/8”	82-1/8”	82-3/8”
7/4 Wood	1-7/8″	1/8”	82″	82-1/2”	83-1/2”	83-3/4”
Public Access	1/2”	1/2”	81”	81-1/2″	82-1/2”	82-3/4”

Click here for Inswing Width Measurements.

Inswing Sill Extender

A sill extender allows a common sill size to be extended to create a larger sill. This is necessary when the jamb size is not the typical width. Most sills are the same length as the jamb is deep. When there is a deeper jamb, the sill will stop short. Adding a sill extender makes the door unit look more correct.

Inswing sill extenders are an aluminum sill nosing that increases the width of the sill. It slides or snaps onto the front portion of a 5-3/4″ sill allowing for different jamb widths. Sill extenders can also be used to create a sill horn. A sill horn is where the jamb leg comes to the side of the sill and the brickmould or casing comes down on the nosing of the sill.

1″ Sill Extender

A 1″ sill extender will be used with a 5-3/4″ sill. This extender is available in 3′, 6′, and 13′ lengths and is available in a mill, bronze, or nickel finish to match the finish of the sill.

1-3/8″ Sill Extender

A 1-3/8″ sill extender will be used to create a sill horn with a 4-9/16″ jamb depth. This extender is available in 3′, 6′, and 13′ lengths and is available in a mill, bronze, or nickel finish to match the finish of the sill.

2″ Sill Extender

A 2″ sill extender will be used with a 5-3/4″ sill. This extender is available in 3′, 6′, and 13′ lengths and is available in a mill, bronze, or nickel finish to match the finish of the sill.

3-1/4″ Sill Extender

A 3-1/4″ sill extender will be used with a 5-3/4″ sill. This extender is available in 3′, 6′, and 13′ lengths and is available in a mill, bronze, or nickel finish to match the finish of the sill.